Protective Coatings

Multicoat is designed and innovated to protect against the high cost of corrosion faced by any industry with the help of wide range of products.

Our comprehensive, cost-effective solutions protect a multitude of metallic and nonmetallic surfaces against the harmful effects of ultraviolet rays, chemicals, oils, alkalis, food acids, water immersion, abrasion, and high-pressure washdowns. Multicoat covers sectors such as processing, packaging, food, pharmaceutical, equipment manufacture, chemical, petrochemical, and other industries where strong requirements exist for preventing premature destruction of surfaces caused by exposure to water and other corrosive elements.

All our coatings are innovative chemical solutions based on various chemistries such as epoxy, polyurethane, MMA, polyester and vinyl ester, including unique fillers to get best protection. We care a great deal about ecological issues and have recently created our High solids coating system, which has no harmful effect on the natural environment and honors vigorous legislative regulations. Multichem is constantly working to ensure that every last kilogram Multicoat or each anti-corrosion coating that we produce meets or exceeds our customers’ highest expectations.

Protective Coating Products Overview

Industrial Corrosion Protection

Multichem offers anticorrosive coatings for virtually any type of steel and concrete structures. Our coatings deliver proven, long-term effectiveness, protecting components in even the most challenging environments, including offshore oil and gas structures and the insides of chemical tanks. MetaPrime, MultiCoat, MultiPox, MultiDur and Armourthane can be used in both alkaline and acid environments. Some of application areas are Chemicals and petrochemicals industries, Oil and gas exploration, Power generation, Mine and metal processing, Water and waste water facilities, Bridges, airport and stadium, Effluent treatment plants.

Intumenscent Coatings

Since last decates, there has been renewed interest in improving the fire safety of buildings. This movement applies not only to the physical structure of the building but to the building’s furnishings and decorative elements as well. Although active fire suppression systems such as sprinklers and fire extinguishers continue to be employed, fire code officials increasingly believe that passive systems are needed as well to reduce smoke and slow fire spread. These passive systems require materials that are either innately fire proof or that can be protected by the incorporation of a fire retardant into the material or by coating the material with a fire retardant coating. Multichem manufactures PyroShield, FireShield, and MultiChar range of products to offer protection to your assets.

Multichem manufacturers water-based technology, which gives a smooth finish in a faster time than other methods. Given the environmental benefits of water-based coatings then these products are now the preferred choice among specifiers and applicators alike. For 60-120 minutes fire protection Multichem have introduced Pyroshield WA range of products giving superior loadings over a wider range of section types, as well as being very easy to spray.

Since last decates, there has been renewed interest in improving the fire safety of buildings. This movement applies not only to the physical structure of the building but to the building’s furnishings and decorative elements as well. Although active fire suppression systems such as sprinklers and fire extinguishers continue to be employed, fire code officials increasingly believe that passive systems are needed as well to reduce smoke and slow fire spread. These passive systems require materials that are either innately fire proof or that can be protected by the incorporation of a fire retardant into the material or by coating the material with a fire retardant coating. Intumescent coatings are the tried and tested way of protecting buildings and ultimately people and lives. Multichem manufactures PyroShield, FireShield and MultiChar, range of products to offer protection to your assets.

Solvent-Based Intumescent Coatings

For when environments are exposed or semi-exposed then Pyroshield S, solvent based products still provide an answer in obtaining an excellent finish in a reasonable time frame.

Epoxy-Based Intumenscent Coating for Hydrocarbon and jet fire

PFP (Passive Fire Protection) coatings are used extensively throughout the oil, gas and petrochemical industries to protect safety critical structures and equipment from the ever present threat of hydrocarbon hazards such as spills, explosions and fires. FireShield and MultiChar system is uniquely suited to protection against such hazards. Based on flexible epoxy intumescent technology, this type of coating is designed to expand upon exposure to heat into an insulating protective char. This prevents steel from heating up rapidly and delays the loss of load-bearing capacity and integrity – buying crucial time for personnel to escape and limiting asset and environmental damage.

High Temperature Coatings

High-temperature-resistant coatings are designed to withstand temperatures ranging from 150°C to over 850°C) while providing protection against corrosion.

High-temperature coating resins could either be an epoxy, epoxy phenolic, epoxy novolac, silicone, or a more specialized multi-polymeric matrix depending on the level of temperature resistance required.

For service under insulation, a single-component product coating can be used for a wide range of operating temperatures and provides excellent protection against corrosion under insulation (CUI). In areas where insulation is not required, a two-coat system consisting of a primer and silicone topcoat is more suited.

Utilizing HeatSheild quality products with proven track records is the key to protecting assets and reducing expensive downtime.

High-temperature coatings are often found in many sectors such as the following industries:

Aerospace
Power
Manufacturing
Petrochemical
Military

Specific examples of applications for high-temperature coatings include:

Jet Engines
Power/Chemical plants/Refineries
Offshore assets
OEM applications
Corrosion Under Insulation
Fireproofing
Buildings and Construction

Coatings for Hygienic Environment

One of the biggest challenges faced by food and beverage manufacturers, hospitals, pharmaceutical facilities, and leisure industry operators is the growth of mold and bacteria—an issue that cannot be ignored. Multichem offers a range of hygiene coatings under the HygiGard brand, specifically designed to protect and enhance internal walls and ceilings in hygiene-sensitive environments. These water-based or 100% solid, resin-rich coatings create a seamless, easy-to-clean surface, eliminating joints and crevices where bacteria can thrive.

Maintaining a sterile environment in food manufacturing plants, breweries, kitchens, pharmaceutical, and healthcare facilities requires careful attention to numerous critical factors. Among them, preventing the growth of mold, bacteria, and other microorganisms is paramount. A proven, technically advanced hygienic coating for internal walls and ceilings provides long-lasting antimicrobial protection, ensuring a hard-wearing, easy-to-maintain surface free from joints and seams where dirt and bacteria could accumulate.

Containment Coating Systems

Primary and Secondary Containment Coatings.

With over 28 years of experience in the protective coatings business, Multichem knows that tanks and storage facilities need a robust and reliable coating system, both on the outside and the inside. Whether you operate a chemical, petrochemical plant or a storage terminal, our proven and wide range of interior and exterior coating solutions will ensure you benefit from long-term protection and reduced repairs.

Right from the new construction stage to refurbishment, Multichem offer Multicoat EsterLine and PhenEpox range of our coatings and linings to your specific cargo to ensure your tanks experience the maximum possible service life. And, to ensure your coating system is applied correctly and to specification, our team of coating advisors inspect your site to ensure you get the best of our technical support and guidance.

Apart from new construction, for refirbishment, we supply maintenance coatings, including fast-return-to-service solutions that ensure your storage tanks are back in service on time every time.

Protective Coating Products

Industrial Corrosion Protection

MetaPrime RustoBlock is an advanced anti-corrosive primer that provides superior protection for metal surfaces. Its fast-drying formula prevents rust formation and enhances adhesion for topcoats. Designed for durability, it ensures long-lasting performance in harsh environments. Suitable for various applications, it offers excellent coverage and compatibility with water- and solvent-based coatings.

MultiCoat products are based on acrylic, epoxy, polyurethane, PTFE, polyphylene sulphide, FEP, ECTFE and PVDF chemistries to give best long term corrosion protection in the Industries from highly corrosive environment . Products are used for infrastructure, bridges, oil, gas, petrochemicals, power and sea ports.

MultiPox products are based on epoxy chemistry to give highest level corrosion protection in the Industries. With chice of zinc and aluminium powders, along with special cross linkers, products are well suited for harsh environments.

MultiDur products are based on polyurethane chemistry to give great protection from corrosion, UV rays, rains, snow and other weather-based corrosive agents. MultiDur are also extremely durable, further strengthening equipments constantly exposed to harsh elements.

Armourthane is a high-performance polyurea waterproofing and protective coating designed for superior durability. It forms a seamless, flexible, and fast-curing barrier against water, chemicals, and abrasion. Suitable for demanding environments, it ensures long-lasting protection for concrete and metal surfaces. Its advanced formulation offers excellent adhesion and resistance to harsh conditions.

Marine Coatings

SeaMate range of products are specifically designed for excellent fouling resistance and release performance, low slime pick-up and easy slime release, reduces vessel’s fuel consumption, regenerating surface, long lasting properties and contributing to minimizing the environmental footprint. Suitable for use at new-building, refurbishment and maintenance.

Intumenscent Coatings

Pyroshield range of products are based acrylic and epoxy based chemistries to protect structures from cellulosic fire and hydrocarbon fire.

Fireshield products are used for hydrocarbon fire designed for 240 minutes of fire protection,

MultiChar is designed for passive fire protection from Hydrocarbon and Jet fire.

High Temperature Coatings

HeatShield is a high-performance thermal insulation coating designed to reduce heat absorption and enhance energy efficiency. Its advanced formulation reflects solar radiation, keeping surfaces cooler and extending their durability.

Coatings for Hygienic Environment

Hygigard products are based on acrylic, epoxy, polyurethane, PTFE, polyphylene sulphide, FEP, ECTFE and PVDF chemistries to give best corrosion protection in the Industries.

Containment Coatings Systems

EterLine are polyester or vinyl ester based coating/lining for protection of steel or concrete from highly corrosive chemcials in immersed condition.

PhenEpox products are based on novalac epoxy chemistry to give best corrosion protection in the in Industries.

Products

Sectors

Protective Coatings

Protective Coating Products Overview

Solvent-Based Intumescent Coatings

Epoxy-Based Intumenscent Coating for Hydrocarbon and jet fire

High-temperature coatings are often found in many sectors such as the following industries:

Specific examples of applications for high-temperature coatings include:

Primary and Secondary Containment Coatings.

Protective Coating Products

Mutichem Group

Quick Links

Connect With Us

Our Location

© 2025 Multichem. All rights reserved.