Cementitious Waterproofing Coatings
Concrete gets affected by water seepage through cracks and capillaries, which may develop during the life cycle of the structure. A perfect waterproofing system is needed to stop water from getting in and damaging the rebar in the concrete. An effective cementitious waterproofing system maintains the durability of the structure. The Multiguard range of cementitious coatings is designed to perform as a damp proofing to waterproofing under high water pressures.
Product Description
Benefits:
- Products are directly applied to the concrete surface after proper and effective surface preparation.
- The complete concrete structure is protected from leakage and corrosion.
- As the coatings are elastic in nature, they bridge any cracks that may develop in the future, thus protecting the structure.
- All products are technically designed to perform throughout the life of the structure.
Following are the products designed for different applications.
Multiguard A
A premium-grade two-component waterproofing coating withstanding high pressure (more than 7 bar). Liquid and powder components, when mixed together, create a coating with more than 30% elasticity and a dense barrier. It is most suited for basement, swimming pool, and water tank waterproofing.
Multiguard A-Control
Two-component high-performance waterproofing coating based on a dual mechanism of crystalline and polymer technology.
Multiguard A-Shield
Two-component waterproofing coating most suited where a balance between pricing and performance is desired. It is an ideal product for surfacing, protecting, and waterproofing concrete, masonry, and other construction materials.
Multiguard A-Ecoshield
Two-component waterproofing coating based on advanced polymer chemistry with the additional advantage of cement technology.
Multiguard A-Elasto
Two-component high-performance waterproofing coating to waterproof and damp-proof concrete, cement rendering, brickwork, and blockwork.
Multiguard A-SuperElasto
Two-component high-performance waterproofing coating that is a highly effective barrier to atmospheric acidic gases such as carbon dioxide, which causes carbonation in concrete structures.
Multiguard A-HiperElasto
Two-component high-performance flexible waterproofing coating that provides an effective barrier to waterborne salts such as chlorides and sulfates and has outstanding wear, weather, and chemical resistance.
Leakshield
Single-component powder-form cementitious coating for high-pressure applications (7 bar), controlling capillary action on walls. Highly suited for basements, water tanks, swimming pools, etc.
Multiguard SuperMortar 1
Ready-to-use 6-12mm thick screed waterproofing with fiber reinforcement for high-pressure application from the negative and positive sides. More suited for terrace, retaining wall, etc., waterproofing. It also creates a leveled surface, closing all pinholes, cracks, and other defects in concrete.
Multiguard A(S)
Single-component waterproofing liquid used with cement for the preparation of coatings. The product can be used as a general-purpose application in all types of waterproofing requirements.
Multiguard Protect
Single-component waterproofing system that forms a hard, highly alkaline screed with a degree of elasticity, which not only protects the concrete or other substrates from the effects of aggressive acid gases, moisture, and chlorides but also has greatly enhanced chemical resistance.
Multiguard Kavach
A two-component high-performance waterproofing coating based on a triple mechanism of crystalline, cement, and polymer technology.
Multiguard A Kavach
It is based on advanced polymer chemistry with the additional advantage of crystalline and cement technology. It is the most preferred product for new and old building construction for surfacing, protecting, and waterproofing concrete, masonry and other construction material.
