Multipox

Primers: MetaPrime and Rustoblock Products
Multipox PA1270
2-Component epoxy based coating, general purpose, colour: smoke gray, black, white, golden yellow, PO-red
2-Component epoxy based coating with migrating corrosion inhibitor
2-component epoxy based coating based on bipolar migrating corrosion inhibitor
Cycloaliphatic based coating, for DM Water also with water resistance, 10% lactic acid, ethanol, skydrol, 70% sulphuric acid, 50% sulphuric acid with volume solid of 74%.
Polysulfide modified epoxy coating
Imidazole modified epoxy coating
Epoxy coating for 50% H2SO4 and 84% phosphoric acid resistance
Epoxy coating modified with Zinc phosphate
Epoxy based protective coating with modified with micacious oxide
Epoxy coating suited for food grade epoxy requirement for pipe coating and water tanks and water tankers.
Interpenetrating polymer network, epoxy novolac coating.
Interprenetrating polymer network, epoxy primer.
Interpenetrating polymer network, aliphatic polyurethane/polyurea.
Micacious iron oxide epoxy, cycloaliphatic amine epoxy, 80% solid content
Micacious iron oxide epoxy, cycloaliphatic amine epoxy, 80% solid content, high speed curing.
Surface tollerance moisture and low temperature resistance coating.
Redoxide Primer, water based acrylic coating
Two component epoxy based coating for potable water tanks and pipe lines
Rust converting coating
Surface tolerrance coating with salt spray resistanc of 3000 hours.
High perfromance epoxy coating
Epoxy based high molecular wt epoxy coating for corrosion protection.