Concrete Repair Products

MULTICRETE® CM is an advanced co-polymer dispersion which, when used as an admixture for sand and cement mixes, produces a high strength waterproofing coating, patching mortar, screed or render. It can also be mixed with cement to produce a slurry for sealing porous and absorbent substrates. Once applied the mortar has excellent resistance to wash out and cures rapidly to form dense impermeable matrix with high diffusing resistance to oxygen, acid gases and chloride ion.

MULTICRETE® CM can also be used to produce Gunite with enhanced properties for application by wet or dry process allowing high build application with low rebound losses at too water- cement ratios.
The enhanced properties ensure high adhesion, low shrinkage, and excellent resistance to freeze – thaw attack and high flexural and compressive strengths.

USES:

MULTICRETE® CM is a unique polymer ideally suited for modification of sand and cement mortars, producing hard and spray applied mortars and renders with enhanced polymeric and pozzolanic properties. The Mortars prepared from MULTICRETE® CM can also be used for pointing of stones, where waterproofing is required. When mixed with cement, the products can also be used as a primer for steel reinforcement and a bonding agent for polymer mortar, renders, concrete and screeds.

ADVANTAGES:

MULTICRETE® CM enhances cementitious mixes to give the following properties:

• Excellent adhesion in dry, damp or permanently wet conditions to both concrete and steel.
• Higher compressive and tensile strength.
• High abrasion resistance.
• Low water permeability due to continued pozzolanic reactions hence has dense matrix.
• Enhanced resistance to freeze – thaw cycles, alkalis and dilute acids.
• Low shrinkage.
• Non Corrosive to steel with high inherent alkalinity,
• Allows easy application to achieve high application thickness in both vertical and horizontal situations. Resulting spray applied mortar have low rebound losses.